Mosconi HLA-Dual 4-Kanal High-Low Adapter

HLA-Dual


High-Low Adapter
Als 2-Kanal (Slim) und 4-Kanal (Dual)
Performance wie HLA-2 und HLA-4 aber:
· Doppelte Eingangsbelastbarbeit
· Minimale Größe, einfachste Installation
· Remote Ausgang von 15mA auf 100mA ma. Last gestiegen.


Technische Daten:
Stand-By Current Consumption < 0.8mA
Operative Current Consumption < 15mA (< 30mA in the Dual version)
Polarity Inversion Protection Yes
Max allowed current on Remote Out 100 mA (normal operation)
Min allowed load on Remote Out 120 Ohm (normal operation)
Remote Out Voltage > 12V @ Irem-out < 100mA
Remote Out Short Circuit Protection Yes (to ground)
Max Short Circuit duration on Remote Out < 10 second (*)
Total Harmonic Distortion < 0.01%
Slew Rate 10V/uS
S/N Ratio > 100dB
Channel Separation > 60dB
Common Mode Noise Rejection > 60dB
Stepdown conversion ratio 4:1 V/V
High Level Input ballast impedance 45 Ohm / 2W each channel
Max continuous (sinewave) Power handling @ 4Ohm 25Wrms x CH
Max allowed Head-Unit nominal power handling 50W x CH (**)
Max Output Signal @ THD < 0.1% 3.2 Vrms
Min Output Load Impedence 2 KOhm
(*) if Max allowed time is exceeded, permanent damages to device may occour.
(**) maximum real RMS nominal power, not PMPO, peak, etc.